Dryer vent cleaning
Whole-home duct cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Abatement Technologies Dryer Vent Cleaning in San Antonio: What to Know First
Dryer vent cleaning for homes with Abatement Technologies ventilation products in San Antonio typically runs $130 – $260 depending on vent length, access, and how much lint has built up inside the run. Most jobs are completed in under two hours, and we provide a written price before any work starts, so you know the number before our technician pulls a single tool off the truck. If your dryer is taking longer to dry clothes, the vent flap outside isn’t opening, or you can’t remember the last time it was cleaned, this page will walk you through exactly what we do and what it costs.
As an independent Abatement Technologies service provider in San Antonio, we work on the ventilation products this brand builds alongside the dryer vent runs they serve. We’re not authorized by or affiliated with the manufacturer, and we’ll tell you plainly when a job needs an OEM part or when a quality aftermarket option does the same work for less. Call (903) 354-8393 and a live person will answer, day or night.
Key Takeaways
- Dryer vent cleaning in San Antonio for Abatement Technologies systems costs $130 – $260 in most homes.
- We’re an independent provider, not a manufacturer-authorized shop, so our recommendations lean toward what actually works long-term, not what protects a warranty sticker.
- Every job gets a written price before work starts, shoe covers and drop cloths inside, and a photo of the clean-up before we leave.
- Our techs know the specific lint-trapping patterns in Abatement Technologies vent runs, especially in newer Stone Oak-area construction.
How Abatement Technologies Products Fail – and How We Fix Them
Abatement Technologies builds solid ventilation equipment, but every brand has patterns. Here’s what we actually see on San Antonio jobs, house after house:
- Abatement Technologies inline booster fans collect a lint ring at the impeller. In longer vent runs, these fans sit mid-duct to push air the rest of the way out. What we see in San Antonio homes, especially two-story houses in the Stone Oak corridor, is fine lint packing onto the back of the impeller blades until the fan vibrates and hums. It’s not a motor failure, it’s a lint-loading failure. We remove the housing, clean the impeller by hand, and check the capacitor while we’re in there. That’s a fix that takes 20 minutes and often saves a $300+ fan replacement.
- Backdraft dampers on Abatement Technologies vent caps stick open in humid weather. San Antonio’s humidity plus dryer exhaust creates a gummy paste at the damper pivot. When it sticks open, outside air and the occasional gecko get into the vent run. We clean the pivot with a dry lubricant that won’t attract dust, then confirm the flap closes with a light push. OEM replacement dampers are available, but honestly, most of the time a cleaning is all they need.
- Vent runs over 25 feet underperform without an Abatement Technologies booster, and shorter runs clog faster when the booster is installed but never cleaned. The brand’s own guidance recommends booster fans on long runs, but we regularly find homes where the builder skipped the booster to save money. The symptom is a dryer that runs two cycles to dry towels. The fix is either a properly placed inline booster or more frequent cleanings, and we’ll walk the run with you before recommending either path.
- Flexible transition ducts behind dryers kink on Abatement Technologies vent connections when the dryer gets pushed back. The connection at the dryer collar is tight-radius by design, and the foil transition crushes against the wall. Crushed duct means airflow drops immediately. We replace that transition with a semi-rigid aluminum piece cut to the exact length needed, so the dryer can sit back without choking the airflow.
- Roof-venting Abatement Technologies systems in San Antonio catch more bird activity than wall-venting systems. Starlings and sparrows love a warm roof cap. We install bird guards sized for the cap, not universal mesh, because a universal guard on an Abatement Technologies cap leaves a gap that lets in tiny debris. The guard costs less than a return visit with a shop vac full of nesting material.
Styles & brands we work with
Our Abatement Technologies Dryer Vent Cleaning Process
Here’s how a typical job goes from phone call to clean-up:
- 1
Call and talk to a person. You reach a human at (903) 354-8393. We ask about your dryer’s symptoms, the vent path, and when it was last cleaned.
- 2
Walkthrough before tools. Paul Adeyemi or one of our technicians walks the vent location with you inside and outside the home. We identify every access point and tell you what we’ll be touching before we touch it.
- 3
Written price. You get a fixed number for the whole job. No per-vent pricing, no surprise line items. If the vent needs a new cap or bird guard, that’s priced at this same moment so nothing gets added later.
- 4
The clean. Shoe covers on, drop cloths under the work area, and we run professional rotary brushes through the entire run. We also clean the dryer’s internal lint trap housing and the exterior vent cap.
- 5
Airflow test and photo. We check airflow at the termination point, confirm the flap opens and closes properly, and take photos of the clean vent and clean work area before we pack up.
- 6
365-Day Done Right Promise. If something isn’t right, call us and we make it right. That’s stamped on every job, not just something we mention when asked.
See the difference
Before
After
Before
After
Before
AfterWhat Abatement Technologies Dryer Vent Cleaning Costs in San Antonio
Most homes in San Antonio with Abatement Technologies vent systems fall into these ranges:
- Standard single-story home, short vent run: $130 – $170
- Two-story home or vent run over 15 feet: $180 – $230
- Long run with an inline booster fan that needs cleaning too: $220 – $260
- Bird guard or vent cap replacement: $40 – $90, priced before we start
What moves the price is access. A vent that terminates at the roofline two stories up takes more time and more care than a ground-level wall cap. If your run is over 25 feet, we’ll discuss adding or servicing a booster fan, because that’s the difference between a dryer that vents and a dryer that pretends to vent. Call (903) 354-8393 for a free estimate, we’d rather give you a real number over the phone than make you guess.
Why San Antonio Homeowners Call Mortons Air Duct San Antonio for Abatement Technologies Work
We’ve been cleaning ducts and dryer vents in San Antonio since 2005, and our technicians work with professional equipment from Rotobrush, Nikro, Honeywell, Aprilaire, and Abatement Technologies. That means the tools in our trucks aren’t the entry-level gear you can rent from a hardware store. They’re commercial machines built for the kind of work we do every day.
Every technician is background-checked and arrives in uniform. We follow the Cedarwell Care Promise on every job: shoe covers and drop cloths inside your home, the work area treated with the same care you’d give it yourself, and a photo of the clean-up before we leave. If you have a Lennox, Trane, or Carrier system in another part of the house, we service those too, so you’re not coordinating multiple companies for the same type of work. And when you call, a live person answers. Always.
FAQs
No. Regular dryer vent cleaning is required maintenance for every dryer manufacturer, and cleaning the vent run does not affect the warranty on your Abatement Technologies ventilation products or your dryer. What can affect a warranty is a clogged vent causing the dryer to overheat, so cleaning it is the safer path. If you’re ever unsure, we’ll tell you exactly what we’re doing so you can check with the manufacturer before we start.
Every 12 months for most households. If you have pets that shed heavily, run the dryer daily, or have a vent run longer than 15 feet, every 6 to 8 months is smarter. San Antonio’s fine dust settles in the lint trap and vent path faster than people expect, especially in newer construction up north where drywall dust from the build can linger in the ducts for the first year or two.
That hum is almost always a lint-packed impeller, not a dead motor. The blades get coated in fine lint until the motor strains against the load. We pull the fan housing, clean the impeller by hand, and retest. If the motor is truly dead, we’ll show you the test result before recommending a replacement, and we’ll price both OEM and aftermarket options so you can choose.
Yes, and we do it often, especially on roof-venting systems in San Antonio neighborhoods with mature trees. We size the guard to your specific cap rather than using a universal piece. A universal guard often leaves a small gap, and a determined sparrow only needs a small gap. The guard goes on after the vent run is cleaned, so you’re not trapping anything inside.
We schedule as quickly as our calendar allows, and a live person will give you real availability when you call. We tell you exactly what we’re doing, and exactly what it costs, before we start. That’s how every job works, whether you’re in Stone Oak, Alamo Heights, or anywhere else in the San Antonio area.
Written by Paul Adeyemi, Owner, Mortons Air Duct San Antonio at Mortons Air Duct San Antonio, serving San Antonio and nearby areas.